Your bag is empty
Don't miss out on great deals! Start shopping or Sign in to view products added.
Shop What's New Sign in
- Input: 9 27V (3~6s LiPo)
- Input TVS protection
- PDB: 4x30A (Max.4x46A)
- BEC 5V 1.5A(2A Max.)
- BEC 10V 1.5A(2A Max.)
- Current Sensor 184A
- Current Scale(1/10th mV/A): 179
- 46x36x4mm, 9g
- Mounting holes 30.5mm 3mm
MATEK FCHUB-6S W/ CURRENT SENSOR 184A, BEC 5V and 10V
₹2,499.00 excl. GST- Working Voltage: 6 -28 v
- Output Frequency: 50hz
- Modulation Mode: FMCW
- Centre Frequency: 24.125Ghz
JIYI Terrain following Simulating Radar
₹15,000.00 excl. GST
Mauch 015 – PL-2-6s BEC 1 x 5.35V with CFK enclosure
₹3,300.00 excl. GST
- Power-Cube 3 ?V3? with 3 outputs 2x 5.3V / 10A + 1x 12.0V / 10A
- Input voltage 4-14S, max. 60V
Mauch 053: PC3 / V3 Sensor
₹25,000.00 excl. GST
- This sensor hub allows to connect two PixHawk Mauch current sensors in parallel in order to add their current capacities.
- The current of both sensors is summarized before reaching the flight controller while the voltage measurement of the LiPo packs are collected from both sensors and passed through the hub to the flight controller.
- The main purpose of this hub is to replace existing protection circuits and to monitor that both paralleled LiPos are supplying the same current to the system.
- Thanks to Mauch Sensor Hub X2, you can spot early when a LiPo starts to fail, way before this situation is irreversible.
- In case of difference in current is of +/- 15%, the alarm output goes ON in order to indicate the fault. The pilote should then land immediately in order to check the batteries.
Mauch 010: PL Sensor Hub X2-V2 with CFK enclosure for UAV/DRONES
₹5,050.00 excl. GST- Max Voltage 12S Capacitance 2800uF Type Electrolytic Current Rating (PCB) 250A Voltage ripple reduction Yes
Reflex Drive Capacitor CAP BANK
₹2,750.00 excl. GST Mauch 090 ? 4-14S HYB-BEC / 12V-3A / 2x 20cm 24AWG
₹3,600.00 excl. GSTMauch 043 ? PL ? FC cable for JST-GH 6pin
₹699.00 excl. GST- Connects a Sensor Board to the SEN. port on a PL BEC, a Sensor Hub X2, a Sensor Hub X8, or a Power-CubeYou can also use this cable to retrofit your own BECMolex CLIK-Mate 1.25mm 4p on both ends / L = 150mm
Mauch 040: PL Sensor Cable
₹700.00 excl. GST
